Robot hose has good flexibility, anti-twisting, good bending performance, and can bear large loads. Acid resistance, lubricating oil resistance and coolant resistance. Smooth surface and friction resistance.Bearing capacity: It can bear the heavy pressure of stepping on foot, without breaking or deformation, and can recover quickly without any damage.Application: The wire feeding system of welding robots in mechanical manufacturing, electrical insulation protection, lighting equipment, automobil

Provide protection:Now hose manufacturers offer various products with wear-resistant shells. Through analysis, it is found that about 80% of hose failures are caused by external physical damage, and wear is proved to be the main reason. Wear is mainly caused by repeated friction between hose and equipment surface or hose. To avoid wear, the hose should be fixed with pipe clamps so that it does not rub against adjacent surfaces. The tightness of the pipe clamp should be appropriate to prevent the

Determine the appropriate bending radius:At present, many hose manufacturers can provide hoses with bending radius smaller than that specified in the promulgated industrial standards, but they should avoid that the bending curvature of hoses is smaller than the recommended small curvature radius, so as to avoid shortening the service life. Therefore, pipe laying should first provide enough bending radius. After installation, the bending radius of the hose should not be less than 8~10 times of th

Types and characteristics of teflon wire feeding tube.PA wire feeding hose-economical wire feeding hose.The imported PA wire feeding hose from Germany has good rigidity, smooth wire feeding and low resistance, which can achieve the welding effect with TBi special contact nozzle for aluminum welding. PA wire feeding hose shall be equipped with copper conduit to prevent the front end of wire feeding hose from overheating and achieve the effect of high temperature resistance.Teflon wire feeding hos